Draper Air Shears DR-84130
Air shears for distortion and burr - free cuts on a range of materials including alu Minium, tin, 1.2mm steel and most plastics. Manufactured from lightweight Aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.
Cutting capacity (mild steel) 18 Gauge (1.2mm)
Strokes per minute 3,200spm
Operating air pressure 90psi (6.3bar)
Average air consumption 5.5cfm(1,132L/min)
Vibration level 4.3m/s2
Min. hose size 3/8" (10mm)
Air inlet 1/4" BSP
Weight 1.28kg
5010559841301
PartNo-DAT-ASH
Draper 84130
Air shears for distortion and burr - free cuts on a range of materials including alu Minium, tin, 1.2mm steel and most plastics. Manufactured from lightweight Aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.
Cutting capacity (mild steel) 18 Gauge (1.2mm)
Strokes per minute 3,200spm
Operating air pressure 90psi (6.3bar)
Average air consumption 5.5cfm(1,132L/min)
Vibration level 4.3m/s2
Min. hose size 3/8" (10mm)
Air inlet 1/4" BSP
Weight 1.28kg
5010559841301
PartNo-DAT-ASH
Draper 84130