Draper Tap and Die Set (52 Piece) DR-79204
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and alu Minium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Carton packed.
Contents::
7 x metric dies: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D
5 x UNF dies: 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D
2 x BSP dies: 1/8", 1/4" - 1" O/D
14 x taper taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D, 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D, 1/8", 1/4" - 1" O/D
1 x tap wrench - American pattern 1/2" capacity
1 x 'T' type tap wrench 1/4" capacity
1 x die holder 1" O/D with guide
13 x HSS twist drills: 2.5, 3.3, 4.2, 5.0, 5.5, 6.8, 6.9, 8.5, 8.8, 9.9, 10.3, 11.4, 11.8mm
1 x screw pitch gauge
1 x screwdriver
1 x centre punch
5 x screw extractors No.1, No.2, No.3, No.4, No.5
5010559792047
PartNo-52MU
Draper 79204
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and alu Minium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Carton packed.
Contents::
7 x metric dies: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D
5 x UNF dies: 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D
2 x BSP dies: 1/8", 1/4" - 1" O/D
14 x taper taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D, 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D, 1/8", 1/4" - 1" O/D
1 x tap wrench - American pattern 1/2" capacity
1 x 'T' type tap wrench 1/4" capacity
1 x die holder 1" O/D with guide
13 x HSS twist drills: 2.5, 3.3, 4.2, 5.0, 5.5, 6.8, 6.9, 8.5, 8.8, 9.9, 10.3, 11.4, 11.8mm
1 x screw pitch gauge
1 x screwdriver
1 x centre punch
5 x screw extractors No.1, No.2, No.3, No.4, No.5
5010559792047
PartNo-52MU
Draper 79204